Jump to content

Recommended Posts

Medium Tank M4 Sherman

431016476f4bff57dd0752893116b6e4.jpg.00f9e285f9037b1228b55313d902e85c.jpgm4laterear.jpg.c68c916956c65818cd217457b1dd71ab.jpgM4A1_Sherman.jpg.ddfa30bd1e3eb4451bccaaba5aa343e3.jpg1920px-M4_Sherman_tank_-_Flickr_-_Joost_J._Bakker_IJmuiden.thumb.jpg.58e1800371b67c5771c59d09362bd5e5.jpg

The M4 Sherman (named after the famous American Civil War general William T. Sherman) is one of the few really iconic fighting vehicles of the Allies during World War Two, and one of the most famous tanks in history. But while this historic status was gained partly thanks to its intrinsic qualities, but also due to the sheer numbers in which they were provided, only surpassed by the Soviet Union’s T-34, with a staggering 50,000 total delivered. It remains by far the most widely used tank on the Allied side during the war. It was derived into countless derivatives and had a very long postwar career which lasted well into the Cold War. It has been largely compared to the T-34, and had the occasion to confront some during the Korean War.

However, the Sherman was not as successful as it seemed. Derived in a haste from the previous and controversial M3 Lee/Grant, it was the first to bear a fully-traversing turret with a 75 mm (2.95 in) gun. It was designed from the very beginning for mass-production. Cheap and relatively simple to build, easy to maintain, reliable, roomy, sturdy, fast, well-armored and well-armed, it was the good-all-around armored vehicle the Allies had sought for until 1942, when it first arrived on the North African front.

It literally soldiered in every corner of the globe, under many colors, from 1942 to the end of the war. These theaters included (in WWII alone) most of North Africa, Russia, most of Europe, the Eastern Indies, the Philippines, many Pacific islands and China.

Genesis and context until 1940

By 1940, Great Britain had found itself desperately short on tanks. Some were provided through the freshly signed Lend-Lease agreement. At the same time, the US Army, fully learning from the shock caused by the Blitzkrieg in Western Europe, was in the process of emergency modernization of its equipment. The M4 was, in fact, the type of medium tank the US industry was not yet prepared to build in early 1940, which led to the intermediate M3 Lee. The latter was to be equipped with a fully revolving turret at first, but the urge in production imposed the choice of a transitional, yet unsatisfactory solution, a 75 mm (2.95 in) gun in a hull sponson. So, by late August 1940, as the M3 production started, work was started on the T6 Medium Tank, the prototype of what would become the Sherman.

Comparison M4 to M4A3

Design of the M4 Sherman

Just like the M3 Lee, the Sherman’s suspension was of the VVSS (Vertical Volute Spring Suspension) type. The running gear comprised three sets of bogies, each with two paired large rubber-covered roadwheels, a rear adjustable track idler wheel and front drive sprocket connected to the gearbox, and three return rollers. The 78-links track was of the standard model, first used on the M1 Combat Car back in 1937, although reinforced and modified to minimize ground pressure.

The Continental R975 engine was an air-cooled, gasoline radial engine delivering 400 hp (298 kW) at 2400 rpm. It was fed by two tanks totaling 660 l (175 gal) of gasoline, which gave around 195 km of practical range (about 120 miles). The power-to-weight ratio was 15.8 hp/ton (11.78 kW/ton). The gearbox was spicer, manual, synchromesh, with 5 forward gears (plus overdrive), one reverse. The controlled differential comprised a built-in brake steering system, which was controlled by levers. There was also a parking brake. The engine compartment contained two fixed large fire extinguishers, manned by a crewmember from the fighting compartment. An auxiliary generator provided extra power and helped warm the engine during cold winters.

The lower hull was made of large welded parts, although the bogies were bolted to the hull for easier replacement or repair, and the rounded front was made of three bolted steel plates. Other external parts were either bolted or welded. The upper hull, at first cast, was later welded, with a well-sloped glacis, flat sides and slightly sloped engine compartment roof, making a characteristic tumblehome culminating just below the main turret. The back plating included a rear “U” shaped exhaust muffler, distinctive of the early production versions. The armor was 76 mm (3 in) thick on the nose and upper glacis, 51 mm (2 in) on the turret and upper sides and 30 mm (1.18 in) elsewhere. The upper hull, at first welded, was cast and rounded on the M4A1.

M4A1 at Chrysler factory plant

The driver sat on the left of the front of the hull, while the driver assistant sat on the right, firing a ball mounted cal.30 (7.62 mm) machine-gun. The main turret was roomy, enough for the three other crew members. The loader sat on the left of the main gun and the gunner on the right, while the commander was at the rear, just behind the loader. The three seats had adjustable mountings and could move 30.4 cm (12 in) up and down and 12.6 cm (5 in) forward and backward. The crew had two portable fire extinguishers, a 2-way radio and the use of an interphone.

Access and evacuation could be performed through four hatches. Two above the frontal glacis, one revolving on top of the turret and one on the floor, just behind the driver’s seat. Peripheral vision was excellent thanks to five pericopes (one for each crew member), with a 360 degree traverse and vertical tilting. The turret, cast in one piece, comprised a large “basket” which helped turn the entire fighting compartment with it, revolving on a rail thanks to a Bendix electric system.

On early models, direct vision slits, protected by thick bulletproof glass and hinged covers, were provided to the driver and assistant, but later eliminated due to wartime experience of bullet splashes. The gunner periscope contained a telescopic sight directly synchronized with the main gun, while the gun itself received a gyrostabilization hydraulic system for more accurate firing while on the move. The gunner aimed the gun with a hand wheel and fired through electronic impulse from foot operated switches.

The main gun was a 75 mm (2.95 in) M3 L/40 model, provided with 90 rounds, at first protected by a Combination Gun Mount M34 and coupled with a fixed secondary cal.30 (7.62 mm) Browning M1919A4 machine gun. Both machine-guns (coaxial and hull) received a total of 4750 rounds in cartridge bands, with some tracers. Later models received the new M34A full mantlet, which also protected the machine-gun port. Anti-air and anti-personal defense was provided by the turret roof cal.50 (12.7 mm) Browning heavy machine gun, provided with 400 rounds. The main gun had elevation and azimuth control and FM radio liaison with an artillery center for stationary gunnery support. The M4 was rugged and could endure a 2500 miles (4000 km) run before requiring any form of maintenance. This was particularly appreciated in many emergency situations, notably Patton’s famous “wild rides”, reminiscent of the Blitzkrieg throughout Europe.

Production of the M4

The first factory which delivered the M4 was the Lima Locomotive Works. All of these first batches were sent to the British Army through Lend-Lease, and fought in Africa. They found themselves instrumental in many operations which turned the tide of the war in this sector in favor of the Allies. At first, production rate was of 1000 M4s a month, but rose quickly as more factories were involved (11 total), to a figure of 2000 each month by mid-1942. These included (for all variants) Pressed Steel Cars Co., Pacific Car & Foundry, Baldwin Locomotive Works, American Locomotive Co., Pullman Car, Chrysler’s Detroit Tank Arsenal, Pullman Standard Car Manufacturing Co., Federal Welder, Fisher and Grand Blanc in Michigan, the last being specially built for the purpose during the war.

A total of 6748 M4s (from July 1942 to January 1944) were produced, as well as 1641 of the late variant equipped with a 105 mm (4.13 in) howitzer for infantry support, the M4(105). Early models had the three-piece bolted nose, while later models had a mixed cast/rolled hull. The gun mantlet also evolved from the M34 to the more protective M34A.

M4A1 battle of Keren, Tunisia

The M4A1 (British Sherman Mk.II)

This first major version was introduced early on in February 1942. It had a fully cast, rounded upper hull. Production of the regular M4A1 totaled 6281 machines until December 1943, but it was replaced by the M4A1(76)W, which received a more recent 76 mm (2.99 in) M1 main gun. 3396 of these improved models were built until March 1945.

The regular “short” M3 L/40 gave a 731 m/s (2400 ft/s) muzzle velocity. But the most efficient was the 1943 model 76 mm (3 in) M1 & M1A1 L/55, which had a 792 to 1036 m/s (2600 to 3400 ft/s) muzzle velocity with the HVAP ammo, being capable of piercing an 100 mm (3.94 in) steel plate at 450 m (1476 ft). The maximum range was 14 km (8.69 mi). Following a painful war experience, the ammo racks and fuel tanks were protected by watery jackets. The commander cupola was also new, featuring 6 prismatic vision blocks 76 mm (3 inches) thick with laminated bullet-proof glass. The engine was the modernized Continental R975-C1.

The M4A2 (British Sherman Mk.III)

M4A2 and M4A2(75)W

This evolution came in April 1942, with a new General Motors 6046 engine (two GM 6-71 General Motors Diesel engines), welded hull with extra applique armor on the hull sides and gunner position (left side of the turret). It was produced to a total of 8053 until May 1944. Early versions of the M4A2(75), had small hatches and protruding drivers’ and co-drivers’ hoods, a 57-degree glacis and dry ammo stowage bins. The rear hull plate was sloped. A transitional version built by Fisher, the M4A2(75)D, had a one-piece 47-degree glacis, with large hatches, but it still used dry ammo bins and applique armor. This model was also produced with a diesel GM 6046, 410 hp, used mostly by the British and the USMC. The range was 241 km (150 mi) with 641 liters (170 gal) of fuel (consumption was 279 liters/100 km or 118.6 gal/mi), total weight 31.8 tons, with a 1.01 kg/cm³ ground pressure. The hull frontal glacis was 108 mm (4.25 in) thick.

M4A2(76)W

The M4A2(76)W was the upgunned late variant, of which over 3230 will be delivered until May 1945. It was fitted with the modified T23 turret, which housed the M1 L/55 gun, which gave an overall length of 7.57 m (25 feet). With the GM 6046 diesel and 673 liters (178 gal) of fuel, the range was 161 km (100 mi). The weight rose to 33.3 tons. The 108 mm (4.25 in) thick glacis was at 47 degrees, with large hatches. By early 1945, the HVSS suspension was fitted.

M4A2E4

Work on this variant of the M4 started in March 1943. The vehicle tested the new independent torsion bar suspension system, which replaced the Sherman’s traditional VVSS suspension. 2 prototypes were produced in the summer of 1943 and tested at the Aberdeen Proving Grounds. The tank borrowed much from the T20E3, another prototype medium tank that would use the same suspension and a 24 inch (0.61 m) wide track. The performance of the suspension on this particular vehicle proved unsatisfactory, and field maintenance too complex. As such, the project was canceled.

One of the prototype vehicles at the Aberdeen Proving Grounds - Photo: thearmoredpatrol.com
One of the prototype vehicles at the Aberdeen Proving Grounds – Photo: thearmoredpatrol.com

The M4A3 (British Sherman Mk.IV)

M4A3

The M4A3 was first delivered by the Ford Motor Company in June 1942, alone delivering 1690 machines by September 1943. It was produced to a total of 5015 by all manufacturers combined. Early versions still had the dry ammunition stowage, direct vision slots for the driver and the 60-degree hull glacis (89 mm/3.5 in). The 3071 next had wet ammo stowage and a newer commander cupola.

Most of all, it featured the new liquid-cooled Ford V8 500 hp engine, which was capable of giving a top speed of 42 km/h on road (26 mph), and a 209 km (130 mi) range. The suspension was the unchanged VVSS, but the transmission was now protected by a one-piece cast steel armored cover. Driver vision slots were augmented by bullet-proof glass and protective covers. Mid-production they also saw the adoption of duckbills, extended end connectors for the tracks, which improved the grip on soft terrains. Early series also saw extra 25 mm (1 in) thick applique armor welded over the ammo storage bins and the turret gunner position, later removed. By 1943-44, the recognition white stars were usually painted black or olive drab in order to mask them to enemy gunners, which used them as an aiming point.

M4A3(75)W

The M4A3(75)W was equipped with the M3 L/40 gun and had wet ammo stowage. Over 3000 were delivered until March 1945. The modification range was similar to the M4A2(75)W.

M4A3(76)W

The 76 mm (3 in) version, the M4A3(76)W was first introduced in March 1944 and a total of 4500 were delivered until April 1945. Modifications range was similar to the M4A2(76)W.

M4A3 (105) late production

M4A3E2 “Jumbo”

The famous M4A3E2 “Jumbo” was a substantially uparmored M4A3 version that gained wide fame in Europe.

M4A3(76)W HVSS or M4A3E8 “Easy Eight”

A famous derivative, commonly known as the M4A3E8 or “Easy Eight”, first produced by Detroit Arsenal factory, had a 47 degree sloped glacis with large hatches, wet ammo bins, full up-armored sides, new HVSS suspensions, a revised turret with the long 76.2 mm (3 in) gun fitted with a muzzle brake. They were designed on British specs (local denomination “Sherman AY”), and were produced from March 1944 to April 1945, with 4542 units total. Many had upper side skirt protection.

They were fast, with the Ford V8 500 hp, giving a maximum 47 km/h (29.2 mph) speed. The “Easy Eight” had a range of 161 km (100 mi), with a 475 l/100 km (201.94 gal/mi) consumption. These saw action in the latest phases of the conflict in Europe and in the Pacific. The “Easy Eight” was retained in service long after the war and saw service in Korea and Vietnam, as well as in many foreign armies.

M4A3E9

In an attempt to address the Sherman’s ever lasting ground pressure issues, the addition of extended end connectors, or ‘duckbills’ on the outside of the tracks were added. The ‘E9’ version took this one step further by adding ‘duckbills’ on the inside edge of the track as well. To achieve this, the bogey trucks were space-out at approximately 4.5 inches from the lower hull. The modification did work, but by this time the wider HVSS track system had become available, and this essentially overshadowed the variant. As such only one vehicle is believed to have existed.

The M4A4 (British Sherman Mk.V)

This series was first introduced in July 1942 and produced until November 1943, to a total of 7499 machines. It had the most resistant welded hull of all the series, despite a downgraded armor (76 mm/3 in glacis), and received a new composite Chrysler multibank engine (made of five car engines) which needed more space (the hull was lengthened by 15 cm/5.9 in) and scrupulous, careful maintenance. This model was not particularly appreciated with US crews and most went to the British and other Allied forces.

The Russians were the most prolific “customers” of this version, but they didn’t like it either, because of the sensitive engine and relatively light armor. The British, Canadian, Australians, Free Polish and Free French all fought in Italy with this model. They also saw service at El Alamein, during the Tunisian campaign, Sicily and Western Europe. But by mid-44, up-armored and up-gunned models gradually replaced them. Losses had been heavy, not only because of enemy fire. The engine rarely caught fire when hit, but caused trouble because of complicated maintenance issues and long or delayed repairs.

The M4A6

This model had a cast front with welded and lengthened sides and was propelled by a diesel Caterpillar D200A radial. A total of only 75 were delivered between October 1943 and February 1944 by Detroit Arsenal.

M4A3 (105) late production

The howitzer version: M4(105)

M4(105)

First introduced in February 1944, production of the 105 mm (4.13 in) version stopped in March 1945, after a total of 1641 machines. It was devised during the Italy campaign, to give added infantry support firepower with the advantage of a fully traversing turret. In fact, the M7 Priest was one of the most widely used SPGs during this particular campaign. The standard M1919A4 howitzer was modified and compacted for the task. All existing gun aiming and facilities for indirect fire were improved.

The armor was slightly thinner than usual, ranging from 63 mm (2.48 in) (glacis sloped at 47 degrees), 38 mm (1.5 in) for the sides and rear and 19 mm (0.75 in) for the top. The mantlet was 91 mm (3.58 in) thick, turret front was 76 mm (3 in), slopes were 51 mm (2 in) and top 25 mm (0.98 in). The engine was the early radial Continental R975-C4, 9-cylinder 4-cycle, air cooled (15,945 cc and 460 hp at 2,400 rpm), giving a range of 161 km (100 mi) and a cruise speed of 38.6 km/h (24 mph) on road.

M4A3(105)

Produced from May 1944 to March 1945 with a total of 3039 machines. It had every improvement of the regular A3 series and thus was more successful. It appeared quickly that the punch of a solid HE round was also more than adequate in many tank to tank engagements against German armor. Used in conjunction with “Zippo” (flamethrower) versions, the USMC deployed these support pairs with high profit against Japanese fortifications.

A famous offspring: The Firefly

The famous Sherman Firefly was, in fact, a British project, equipped with the QF 17-pdr (76.2 mm/3 in) gun. More than 2000 were built and served in the European Theater of Operations.

Derivatives

M10 Wolverine Tank Destroyer

The M10 GMC was armed with a 3 in gun (76.2 mm), being the first of the famous trio of US tank destroyers. Over 6700 were built.

M36 Jackson Tank Destroyer

The M36 GMC was armed with a far more powerful 90 mm (3.54 in) gun. 1400 were built and they had a long postwar career.

M7 Priest HMC

The M7 Priest was a self-propelled howitzer using the standard M1/M2 105 mm (4.13 in) howitzer.4443 were built until the end of the war.

Grizzly

The Grizzly was a Canadian version built using US spare parts at the Montreal Locomotives Factory on the M4A1 chassis. 188 were built.

Flame-thrower versions

M4A3R3 Zippo: Probably the most famous of these versions, developed by the USMC to deal with Japanese bunkers, reinforced pillboxes and other fortifications. The name came from the famous lighter. It was developed in 1944 after the terrible casualties at Saipan, and first served en masse at Iwo Jima and later at Okinawa.

M4 Crocodile: British modified M4s along the same lines as the Churchill Crocodile, for the US 2nd Armored Division.

Sherman Badger: An offspring of the Ram Badger, this was a Canadian version of the M4A2 HVSS equipped with a Wasp IIC flamethrower.

Sherman Adder: Local conversions kits developed in India for the Sherman III and V which fought in the Eastern Indies campaign.

Sherman Crocodile

Heavy GMC versions

155 mm Gun Motor Carriage M40: This self-propelled gun used the “Long Tom” (155 mm/6.1 in) artillery piece and was assisted by the T30 cargo ammunition carrier.

203 mm Howitzer Motor Carriage M43: This 8-in howitzer version was closely based on the M40.

250 mm Gun Motor Carriage MMC T94: A 10-in GMC also closely based on the M40, probably the heaviest piece of ordnance ever put on a Sherman.

Rocket-launcher versions

T34 Calliope: Famous rocket version, developed in 1944 and massively used against German positions in 1945. Fired up to 60 113 mm (4.45 in) (E1) or 183 mm (7.2 in) (E2) rockets.

T40/M17 Whizbang: A 1944 special demolition version equipped with a set of short-range 7.2″ HE rockets (183 mm).

Sherman Tulip: A handful of Shermans were equipped with two 3-inch (“60 lb”) RP-3 (76.2 mm) rockets on rails on the turret.

M4 105 Dozer

Genie versions

M4 Dozer: M4 fitted, in 1943, with a hydraulic dozer blade from a Caterpillar D8. Widely used in many theaters of war to create airfields and base camps in wooden or jungle areas. First developed as a kit, but later on more turretless Shermans appeared with this equipment fixed permanently. It was largely used in the Normandy Bocage, later replaced by Shermans equipped with the Culin Cutter kit.

M4 Doozit: M4 dozer equipped with demolition charges on a wooden platform. Never used in combat, contrary to the T40 WhizBang.

Sherman T40 Whiz Bang

M4 Bridgelayer: Many US and Commonwealth versions. First introduced in Italy as a turretless Sherman equipped with a frame-supported assault bridge with a rear counterweight. There were also the British Fascine carrier Crib, Twaby Ark, Octopus used by the 79th Armoured Division, the Plymouth (Bailey Bridge) and the US Sherman AVRE fitted with a Small Box Girder bridge.

M4 Mine-clearer: No less than 26 variants, some never operational, came to life between 1943-45. First operational ones appeared in Italy. The US-versions (T1-T6 Roller) used two massive front rollers to explode the mines by ground pressure, while the British versions Sherman Crab (T2-T3 and sub-variants) used a frontal flail roller, similar to the Scorpion. The Canadian CIRD (Canadian Indestructible Roller Device) was a land-mine exploder. There were also a serrated edged disc version, mine exploder versions equipped with a frame with small rollers or a steel plunger, several mortar versions, a remote-control demolition version and a plow version with depth control apparatus.

Recovery versions

Sherman ARV: (Armored Recovery Vehicle) Several British versions based on the Sherman III (M4A2) and Sherman V (ARV I and ARV II).

Sherman BARV: Same, but specialized for beach vehicle recovery.

ARV

BARV

Amphibious versions

Sherman DD: (for “Duplex Drive”, but the crews nicknamed it “Donald Duck”) This special-purpose vehicle was specifically developed for D-Day. It featured a flexible waterproof canvas skirt fixed on the mudguard, reinforced with a folding wooden and metal frame.

The principle was to create some buoyancy through a “flotation screen”, first developed by the British Hungarian-born engineer Nicholas Straussler in 1940. Several trials were performed with various tank models including the Valentine but later applied to the Sherman in the perspective of future amphibious landings. Other modifications included a bladed propeller fitted at the back, which could be activated by the main engine (hence the name of “duplex drive”).

The idea was sound and well-tested during D-Day on June 6, 1944, several hundred British and US DDs, launched from cargo ships 2 miles (3.22 km) from the shore assaulted their respective beach sectors. However, due to the bad weather, many were lost en route to the shore. They had more successes during operation Dragoon (landing in southern France) and when crossing the Rhine by early 1945.

Sherman DD

Shermans with T6 devices: This was a kit adapted to a limited number of USMC Shermans during the assault on Okinawa. It consisted of four (for each side) boxy pressed-steel floats, called pontoons, which procured buoyancy, while the tracks provided some propulsion. It was only used close to the shore. The equipment was then removed by the crews for the upcoming operations.

Shermans with Deep Wading Gear: This apparatus consisted of two large ducts mounted on top of the engine ventilation hatch and exhaust. Thanks to this system, which caught air one meter above the tank, and well-sealed hatches, the Sherman could be deposited by large ships on the sea floor, at more than three meters depth. This kit could also be used to ford large rivers. The USMC used some for operations in the Pacific and in Europe, some took part in the assault on Dieppe (1942), at Salerno and during the Normandy landings in 1944.

The Sherman in operations

As General Patton himself summarized: “In mechanical endurance and ease of maintenance our tanks are infinitely superior to any other”. This was especially true compared to the Tigers and Panthers which had a high consumption, requiring careful maintenance and limited cross-bridges capabilities.

The Sherman’s mobility was improved by a favorable power-to-weight ratio. German reports stated that the Sherman could climb slopes at angles thought impossible for any Panzer. Their narrow build also helped them cross narrow streets, bridges and forested areas as well, but most of all, helped transportation by rail, therefore improving their mobility.

A modern-day reenactment in Belgium - credits: Jean-Pol GRANDMONT

Their high, bulky nose helped them crush thick vegetation easily, and they were found sturdy and powerful enough to go through any kind of house or wall, which helped them in many urban fights, especially in Italy. However, despite their moderate ground pressure, the narrow tracks were judged inadequate on soft terrain, especially mud and snow. A partial response was found in the adoption of extra track parts known as “Grousers” or “Duckbills”. This feature was factory-born to help the M4A3E2 Jumbo reduce ground pressure. It became mandatory in the “Easy Eight” as well, and these improved tracks were also fitted on some late types by 1945.

The standard VVSS suspension was also the object of some criticism, openly compared to the far more refined torsion arm system used by the Panther, which allowed a very smooth ride and more accurate fire on the move. The solution came in late 1944 with the adoption of the improved HVSS (Horizontal Volute Spring System). The basic system was not changed, but it secured a smoother ride and a better weight distribution, which helped to stabilize the tank.

British or Canadian Sherman III at Ranville, Normandy, june 1944

Large-scale production and a limited weight (which never really exceeded 36 tons except for a few machines, the average weight being 31-33 tons) helped the large-scale transatlantic shipping of these, despite U-Boot losses. This allowed overall superiority in numbers on the battlefield. Training required few hours and M3 Lee veteran drivers and even gunners had no problems operating the Sherman, thanks to a high level of standardization. For infantry support, the Sherman looked ideally suited.

Dominating the terrain, the commander had an excellent view and the infantry, advancing behind, was well-protected. Two cal.30 (7.62 mm) machine-guns fired in a “blind mode”, just producing a volume of fire, especially into the Normandy hedgerow and thick vegetation areas in general. But the heavy cal.50 Browning 12.7 mm was even more powerful, efficient against all kind of fixed targets: brick walls, wooden structures, metal pillboxes, even concrete, and could destroy most of the German prime movers and vehicles, even the armored “Hanomag”. It could be also lethal, with some luck, against low-flying aircraft. Its downside was the completely exposed position of the machine gunner, as he had to sit on the rear deck of the tank to use it.

However, the M4 losses during the war reflect the “dark side” of this story. On every front, single tank-to-tank engagements against German tanks turned to be generally unfair, especially with the early versions. The 76 mm (3 in) frontal glacis just couldn’t stop the most recent German AT guns, not to mention the sides, just 50 mm (1.97 in) thick. The hull, due to the high transmission (required by the radial engine) towered at nearly 3 meters (9.84 ft) above the ground, twice the height of the most common German AFV, the StuG III.

Post-war, the Sherman tank gained an unfounded reputation for catching fire easily which still endures. For a tank which in later versions had wet ammo storage and extra protection for ammunition this reputation was meaningless, but nevertheless, it endures long after the Normandy campaign.

In Normandy, many Shermans were also killed because of well-hidden and camouflaged AT guns and tanks, helped by the bocage configuration. A partial solution was given by the use of a Culin hedgerow cutter fitted to the lead tank of a company, which was usually also the first one to be killed in action.

M4 in Belgium, advancing in close support of a US platoon, 1944

The Sherman design evolution dictated by wartime experience called for a thickening of the glacis and side armor, from 76 to 89 mm (3 to 3.5 in), then 108 (4.25 in) and finally 178 mm (7 in) on the “Jumbo”. The Jumbos were usually used as leading tanks. Shell-proof, they spotted the enemy and helped out-flanking maneuvers. However, the “Easy Eight” and “Firefly” rarely led companies, but instead, they were called when the enemy was spotted, using their high-velocity gun to terminate the threat. The British and Canadian versions also camouflaged their long 76.2 mm (3 in/17-pdr) barrel to appear just the length of a standard 75 mm gun and trick enemy spotters which had to choose their targets.

Additional armor plate was often welded in front of the driver and co/driver’s position at the front of the tank and at the side to give them greater protection. The armor plate at the front was 1 1/2 inches (38.1mm) thick and only welded at the top and bottom at an angle leaving a gap in between. This was a form of early spaced armor.

Armor issues led many crews to come up with some sort of impromptu protection made in the field of whatever available, namely sandbags, spare track links, concrete, wire mesh and wood, notably against shaped charge rounds (Panzerfaust and Panzerschreck). General Patton ordered a study of the practice of adding loads of sandbags, ordering some systematic tests, which proved that only in a few particular angles the shaped charge of a Panzerfaust failed to penetrate the armor. Therefore, as this practice both stressed the chassis and overheated the engine, it was soon forbidden.

M4A3E8 Korean war

Cold war career and memorabilia

Despite being designed in 1941, the Sherman was still in service in many countries as far as the fall of the iron curtain in 1990, leaving the strange impression of a “living fossil”. This could be found in the many improvements performed on its chassis, a testimony to its sturdiness and adaptability, and the huge supplies of spare parts available due to an early standardization and unrivaled, at least in the West, mass production. The “Easy Eight” was the blueprint for some improvements and late wartime versions that fought under the US flag during the Korean war and later the Vietnam war, under South Vietnamese flag. The Israeli completely modernized the type, later known as the M51 “Super Sherman”, which performed well during the 1967 and 1973 wars, armed with a new 105 mm (4.13 in) high velocity gun.

M4 Sherman specifications

Dimensions 5.84 x 2.62 x 2.74 m
19’2” x 8’7” x 9′
Total weight, battle ready 30.3 tons (66,800 lbs)
Crew 5 (commander, driver, co-driver, gunner, loader)
Propulsion Continental R975 9-cyl. air-cooled gasoline, 400 hp (298 kW)
Maximum speed 48 km/h (30 mph) on road
Suspensions Vertical Volute Spring (VVSS)
Range 193 km (120 mi)
Armament M2 L/32 or M3 L/40 75 mm (2.95 in) with 90 rounds
2xBrowning M2HB cal.30 M1919 (7.62 mm) machine-guns
Armor Maximum 76 mm (3 in)

Gallery

Cutaway view of the M4 Sherman - Credits: WikipediaDresden Museum, early M4 rear viewM4A4 (Sherman V) at the Imperial War MuseumVarious special-purpose Sherman versions

Links & Resources about the M4 Sherman

The M4 Sherman (Main Wikipedia article)
The M4 on WWIIVehicles
The M4 Sherman on globalsecurity.org
Complementary data about the M4 on afvdb.50megs.com
Fine large scale M4 photos on the Shadock
A highly comprehensive list of Sherman books & reviews -modeler friendly
Sherman Minutia, tech database (the shadocks)

Variants

usa_r.jpg US variants

M4A3(105), Company H, 69th Tank Battalion, 6th Armored Division, Ardennes, December 1944.
M4A3(105), Company H, 69th Tank Battalion, 6th Armored Division, Ardennes, December 1944.

M4A3(105) Sherman, 713th Tank Battalion, Okinawa, 1945.
M4A3(105) Sherman, 713th Tank Battalion, Okinawa, 1945.

M4A3R2 Zippo
M4A3R2 “Zippo”, late version HVSS, flamethrower variant developed by the USMC, here deployed at Okinawa, in support to the 1st Marine Division, May 1945.

M4A3 Calliope from the 40th Tank Battalion, 14th Armored Division, Obermodern, Germany, March 1945
M4A3 Calliope from the 40th Tank Battalion, 14th Armored Division, Obermodern, Germany, March 1945

M4 Sherman Crab, Normandy, June 1944.
M4 Sherman Crab, Normandy, June 1944.

 

canada_ww2_r.jpg Canadian derivatives

Canadian Grizzly
Grizzly I, a Canadian-built Sherman M4A1. Only 188 were built by MLW.

M4 early production, Tunisia
M4, early production version (1942), 13th Armored Regiment of the 1st Armored Division, Tunisia, March 1943. One of the rare Shermans actually painted sand beige in US Service.

M4 early production
M4 Sherman, early production vehicle, 32nd Tank Battalion of the 3rd Armored Division, Normandy, 1944. Notice the “low visibility” stars.

M4 early production, Belgium, 1945
Early production M4 Sherman, 40th Tank Battalion, 8th Armored Division, Belgium, February 1945, at the end of the battle of the Bulge.

M4 early production, FFL 2nd Armored Division, 1st Army, Southern France, August 1944
M4 Sherman, 2nd Armored Division, 1st Free French Army, Operation Anvil Dragoon, Provence, August 1944.

M4 of an unknown unit, Normandy, summer 1944
Early type M4, unknown unit, Normandy, summer 1944.

M4 mid-production, Monte Cassino, February 1944
M4 Sherman, mid-production version (1943), of the 756th Tank Batallion, 5th Army, Monte Cassino sector, February 1944.

M4 early production, Normandy, 1944
M4 Sherman “Hurricane”, H Company, 66th Armored Regiment, 2nd U.S. Armored Division, Normandy, June 1944.

M4, Italy, February 1944
C company, 756th Tank Battalion, 5th Army, Italy, February 1944.

Early production M4 Sherman, Brittany, 1944
37th Tank Battalion, 4th U.S. Armored Division, Brittany, France, July 1944.

Sherman DWG
Sherman DWG (Deep Wading Gear), C company, 70th Tank Battalion, Utah Beach, Normandy on D-Day.

Sherman, 27th Staffordshire Yeomanry Armoured brigade, Normandy, July 1944
Sherman Mk.I of the 27th Staffordshire Yeomanry Armoured Brigade, C squadron, Second Regiment, Normandy, summer 44.

M4 with side skirts, Normany, July 1944
M4 with side skirts, unknown unit, Operation Cobra, Normandy, July 1944.

M4 composite hull, Philippines Invasion, March 1945
M4 with a composite hull, 175th Tank Battalion, 123rd Regiment, 33rd Infantry Division, Leyte, Philippines invasion, March 1945.

M4 composite hull of the 96th Infantry Division, Leyte, fall 1944
M4, composite hull, “Bushmaster” of the 763rd Tank Battalion, 96th Infantry Division, Leyte island, Philippines, fall 1945.

Sherman Mk.I Hybrid of the 144th RAC, Italy, March 1944
Sherman Mk.I Hybrid (composite hull) of the 144th RAC, Italy, March 1944.

Sherman DD
Sherman DD (Duplex Drive), 743rd Tank Battalion, Omaha Beach, Normandy, D-Day.

Sherman M4A1, Sicily, 1943
Sherman M4A1, early production variant, Operation Husky, Sicily, July 1943.

Sherman Mk.II, El Alamein
Sherman Mk.II, 3rd The King’s Own Hussars, 5th Armoured Brigade, VIIIth Army, Egypt, September 1942.

Sherman Mk.II of the 14th Armored Division, El Alamein, October 1942
Sherman Mk.II early type, HQ, 3rd Armored Brigade, El Alamein, October 1942.

Sherman Mk.II, El Alamein
Sherman Mk.II, 9th Queen’s Royal Lancers, 2nd Armoured Brigade, 1st Division, Egypt, November 1942.

Sherman Mk.II of the 3rd RTR, 9th Armoured Brigade, El Alamein, October 1942
Sherman Mk.II early type from the 3rd Armored Brigade, El Alamein, October 1942.

Sherman Mk.III DV 2nd New Zealand Division
Sherman Mk.II (Direct Vision Type), C squadron, 3rd Hussars, 9th Armoured Brigade, 2nd New Zealand Division, El Alamein, November 1942.

Sherman Mk.III, Royal Wiltshire Yeomanry
Sherman Mk.III late type, C Squadron, Royal Wiltshire Yeomanry, El Alamein, November 1942.

M4A1, Tunisia, March 1943
M4A1 mid-production vehicle, U.S. 1st Armored Division, “Henson Force”, Battle of El Guettar, Tunisia, March 1943.

M4A1, Tunisia, February 1943
M4A1 mid-production, “Major Jim”, 2nd Battalion, 13th Armored Regiment, 1st Armored Division, Kasserine pass, February 1943.

Sherman M4A1, Caroline Islands
M4A1 mid-production, 603rd Armored Regiment of the 41st Infantry Division, Carolines Islands, Pacific, late 1944.

Sherman M4A1 late, Kwajalein, January 1944
M4A1 late production, 7th Infantry Division, Ebeye Island, Pacific, part of the Kwajalein Atoll, Marshall Islands, January-February 1944.

Sherman M4A1(76)W
Sherman M4A1(76)W, 11th Tank Battalion of the 10th Armored Division, Ardennes, January 1945.

Sherman M4A1(76)W HVSS
Sherman M4A1(76)W HVSS (Horizontal Volute Spring Suspension), Western Germany, March 1945.

Sherman M4A2, early production
Sherman M4A2 (early type with a modified commander cupola and duckbills), Iwo Jima, February 1945.

Sherman M4A2, mid production
M4A2 (mid production) “Adder”, A company, 3rd USMC Tank Battalion, Iwo Jima, March 1945.

M4A2, King Kong
Sherman M4A2 “King Kong” commanded by Lieutenant Max English, 4th Marine Tank Battalion, Saipan, 1944.

Sherman M4A2, mid production
M4A2 mid-production, “Jungle Jim”, 4th Marine Tank Battalion, Saipan, 1944.

Sherman Mk.III, 3rd County of London Yeomanry, Italy
Sherman Mk.III, 3rd County of London Yeomanry (3rd CLY), Italy, Winter line sector, fall 1943.

Sherman Mk.III, 48th RTR, Anzio, 1944
Sherman III “Ellza Poppin II”, 48th Royal Tank Regiment, Anzio, 1944.

Sherman M4A2 late, in Russian service
Russian M4A2 (late production), with the 47-degree slope and an added 108 mm (4.25 in) of frontal armor. Northern Front, fall 1943. Around 2000 M4s were delivered at Arkhangelsk. Most were M4A2s, which were immediately put to use on the Northern Front. Those delivered through the “Persian Corridor” saw action in the Taman peninsula and in Northern Caucasus from early 1943.

Sherman M4A2 (75)W, 46th Armored Brigade, 1st Armored Division
Russian M4A2(75)W of the 46th Armored Brigade, 1st Armored Division, Northern Front, winter 1943-44.

Captured Sherman M4A2
Panzerkampfwagen M4-748(a), captured Sherman in German service, from an unidentified unit in Italy, 1944. Due to their appearance and the fact that few disabled Shermans were left in a repairable condition, perhaps less than twenty Shermans of all versions were ever used in German service, although clear evidence shows this occurred in Tunisia, Italy and during the Battle of the Bulge.

Sherman M4A2(76)W, early type
M4A2(76)W, early type, in Russian service with duckbills, Northern Front, Eastern Prussia, late 1944. Slogan: “To Berlin!”.

M4A2(76)W, late type
M4A2(76)W, late type with duckbills in Russian service, Battle of Berlin, May 1945.

Sherman M4A2(76)W, U.S. 2nd Armored Division, western Germany, March 1945
Sherman M4A2(76)W HVSS of Patton\’s U.S. 2nd Armored Division, Western Germany, March 1945.

M4A3, early production
M4A3 early type, 3rd Armored Division, Normandy, June 1944.

Sherman M4A3, early production, Italy, 1944
Sherman M4A3 early type, 1st Armored Division, liberation of Rome, June 1944.

Sherman M4A3, mid production version
Sherman M4A3 mid-production “Cheyenne”, 2nd Armored Divison, Normandy, June 1944.

M4A3 mid production vehicle, Ardennes, 1945
M4A3 mid-production vehicle with late train type, 11th Armored Division, in support of the 30th U.S. Infantry Division, Ardennes, Belgium, January 1945.

Sherman M4A3 late production, Nancy, 1944
Sherman M4A3(75)W (equipped with duckbills and metal track links) of the 4th Armored Division, 3rd US Army, battle of Nancy, September 1944.

Up-armored late M4A3, Ardennes, 1944
An up-armored M4A3 in the Ardennes, January 1945. Because of the lack of protection offered by the early versions, experienced crews took the matter into their own hands and usually applied improvised protective measures in the field. Wooden planks, beams, rails, steel plates, spare track links and improvised cofferdams made of wood and sandbags, like seen here, were some of the solutions found. The engine could not keep up with the extra load, and, after an inquiry following an unusual rate of breakdowns and high consumption figures, Patton forbade tank crews from such practices.

M4A3 late production, Southern Germany, March 1945
M4A3 late production vehicle with an improvised camouflage made of regular washable white paint and mud spots, South-Western Germany, March 1945.

M4A3 late production, Ardennes, 1944
M4A3(75)W of the 6th Armored Division, Ardennes, Belgium, January 1945.

M4A3 at Iwo Jima, January 1945
M4A3(75)W “Beelzebub” of B company, 4th USMC Battalion at Iwo Jima, January 1945. Notice the rare camouflage, wooden panels, Deep Wading Gear and protective grids above the hatches. Notice the protection grids above the driver hatch, turret hatches and commander cupola hatch. They were intended against Japanese suicide squads throwing grenades and other impromptu exploding devices inside. Other crews devised a crown of spiked metal rods, welded around the turret hatches.

M4A3(76)W, 12th African Light Infantry Regiment, FFL, Vosges, 1944
M4A3(76)W from the 12th African Light Infantry Regiment (1st French Army), Vosges area, fall 1944.

Sherman V (M4A4) of the 2nd Armored Brigade, Irish Guards, Operation Goodwood, June 1944.
Sherman V (M4A4) of the 2nd Armored Brigade, Irish Guards, Operation Goodwood, June 1944.

Sherman V of another unidentified Irish unit, Operation Goodwood, Normandy, June 1944.
Sherman V of another unidentified Irish unit, Operation Goodwood, Normandy, June 1944.

M4A4 (Sherman V) of the RHQ 13/18th Royal Hussars, Normandy, June 1944.
M4A4 (Sherman V) of the RHQ 13/18th Royal Hussars, Normandy, June 1944.

Chinese M4A4 from the 1st Provisional Tank Group, Burma, 1945.
Chinese M4A4 from the 1st Provisional Tank Group, Burma, 1945.

M4A6 Sherman
M4A6 in trials in early 1944. With only 75 produced, the M4A6 never saw operations.

M4A3(76)W
M4A3(76)W HVSS of the 41st Tank Battalion, 11th Armored Division, 3rd US Army, Rhine western banks, February 1945

M4A3E8, Germany, 1945
M4A3E8 “Easy Eight”, the last evolution of the Sherman, Southern Germany, May 1945.

Colonel Creighton Abrams' Thunderbolt VII and his famous personal insignia, Horazdovice, May 1945.
Colonel Creighton Abrams’ “Thunderbolt VII” and his famous personal insignia, Horazdovice, May 1945.

M4A3E8 in Korea, 1951.
M4A3E8 in Korea, 1951.

South Korean Easy Eight in 1952 with the famous Tiger Pattern.
South Korean Easy Eight in 1952 with the famous “Tiger Pattern”.

 

 

 

  • Like 3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Who Viewed the Topic

    9 members have viewed this topic:
    Billy Jones Jr. Let_Freedom_Ring Skillet 417 2nd Amendment Militia Megatron Ripcannon fixer BuryTheHatchet John Last

Who we are

We are a community of concerned patriots who are not overly confident in the current direction of our society, from the wild political climate to what can be summed up as a lack of morals or a complete void of integrity and pretty much a blatant disregard of respect..... Respect for our past, respect for our future and respect for each other. In order to protect our constitution and life as we know it, we decided to not be the silent majority anymore and pull our selves up by the bootstraps and make the world a better place. This website is to unite people like us, people who want to make a difference ... and do it the right way, Little did we know that in doing so we would create the number one militia community online. Here we are. Enjoy.

Disclaimer

We require all members to think before they post. We understand the issues raised on this site may lead to heated debate, but we still require all users to maintain a respectful environment. My Militia website bears no responsibility for the accuracy of anyone's comments and will bear no responsibility or legal liability for any discussion postings. We reserve the right to remove posts without notice, and the right to ban anyone who willfully violates the rules. All content is posted live with no moderation. If you see something that you think shouldn't be here please report it so we can handle it accordingly. Always respect the privacy of others if something is shared with you in a private fashion such as real names, emails or phone numbers. Please keep them private.
×

Important Information

Your Privacy Is Important To Us Learn More: Privacy Policy