Jump to content

Blogs

Featured Entries

  • wquon

    Gear: Old School vs New School

    By wquon

    Money, weight, efficiency, and modularity – this is generally what people compare when looking at gear. Another is standardization when working in groups, but I won’t be diving deep into that one on this chat.   Money – Everyone has heard it by now “Buy once, cry once” and, in large, its true. If you invest in good gear, you have less to worry about in the long run, but those with disposable income may feel the urge to buy their way past a learning curve… which isn’t a thing. So be car
    • 10 comments
    • 979 views

Our community blogs

  1. This Day in History: Paul Revere makes his famous ride

    On this day in 1775, Paul Revere makes his famous ride. I am so sorry to tell you that he did not really yell “the British are coming!” as he rode. But he did accomplish one important goal: He warned Samuel Adams and John Hancock that British soldiers were coming to arrest them.

     

    He’d intended to continue on to Concord, warning those townspeople about British movements so weapons and stores could be secured. Unfortunately, his ride was interrupted.

     

    Massachusetts had been in turmoil for quite a while. The British had even dispatched soldiers to the colony and appointed a military governor. Their tasks? Enforce the Coercive Acts and suppress rebellion among the colonists.

     

    Patriots formed a committee to keep an eye on the British soldiers and to gain intelligence about their movements. Revere himself later said that the committee was very careful to keep its existence a secret. “[E]very time we met,” he wrote, “every person swore upon the Bible, that they would not discover any of our transactions, But to Messrs. Hancock, Adams, Doctors Warren, Church, & one or two more.”

     

    One Saturday night in April 1775, committee members noted unusual movements among the British boats and soldiers. They figured something was afoot. By April 18, the movements of the soldiers were becoming even more suspicious. Dr. Joseph Warren sent for Paul Revere at about 10:00 p.m. He asked Revere to take off immediately for Lexington. Revere was to warn Hancock and Adams about the soldiers; it was believed that they were about to be arrested.

     

    Warren had already dispatched another man, William Dawes, with the exact same message. The two men took different routes. The logic was that, if the same message traveled by two different routes, then surely at least one of the messengers would arrive safely.

     

    Revere had previously helped to arrange for a signaling system, just in case a warning could not be delivered in person. If the British were coming “by Water, we would shew two Lanthorns in the North Church Steeple; & if by Land, one, as a Signal.” He ensured that this signal would be sent, then he set off on his journey. Two friends rowed him across the Charles River. On the other side of the river, he was able to get a horse and set off at about 11:00 p.m.

     

    Soon after he took off, by his own account, he “saw two men on Horse back, under a Tree. When I got near them, I discovered they were British officer. One tryed to git a head of Me, & the other to take me. I turned my Horse very quick, & Galloped towards Charlestown neck, and then pushed for the Medford Road. . . . I got clear of him . . . .”

     

    Revere arrived in Lexington in time to warn Hancock and Adams. Then he and Dawes set off for Concord to help secure the weapons and supplies there. They were soon joined by another rider, Dr. Samuel Prescott. Unfortunately, the trio was stopped by British officers. Prescott and Dawes escaped, but Revere did not. One of the British officers, Revere later wrote, “Clapped his pistol to my head, called me by name, & told me he was going to ask me some questions, & if I did not give him true answers, he would blow my brains out.”

     

    Revere ended up getting away when one of the British soldiers needed his horse. Although then on foot, he managed to get back in time to see part of the Battle on Lexington Green.

     

    The story will continue tomorrow with the “shot heard round the world”!

     

     

    ---------------------------------------
    Support the writter
    https://www.taraross.com/
    https://www.taraross.com/post/tdih-paul-revere-ride

  2. wquon
    Latest Entry

    MY GEAR, PART 1

     

    I’d like to preface this by saying; you should always be fine tuning your gear, as such, it changes time to time (and gear is not a substitute for skills).

     

    more on that here - https://www.mymilitia.com/blogs/blog/10-wquons-input/

     

    This is what I started out with (with kit and ballistic “diaper”), because it was mandatory.

     

     

    image.thumb.jpeg.63f4e474c2e6ede445f07975c1589609.jpeg

     

    Sometimes, even if you don't know where you’re going at the moment, you can narrow your choices by where you don’t want to end up. This has been the case many times in my life.

     

    I knew I wanted something more breathable and lightweight. There are many flavors, but I chose a carrier that was just enough to carry plates and had the ability to snap on a shingle/micro rig.

    The more I used it I realized that in most circumstances I was looking at, I didn’t need a plate carrier. However; I wanted it to work with my carrier. I also wanted modularity, because “missions” usually change. Having a fixed load-out, like an LBV, I generally found overly irritating.

     

    All this brought me to the Spiritus micro chest rig;

     

     

    image.png.7ec6abe79b2f8602cd1cee97ad55f211.png

     

    Since then I’ve also learned that I don’t like elastic retention. It is a pain in the butt to index mags, and I am not the only one. Had an idea and found others have done the same;

     

    https://www.youtube.com/watch?v=yrZgA8JxiPY&t=5s

    https://www.youtube.com/watch?v=vRkHtCaL8yQ&t=522s

    https://www.youtube.com/watch?v=Y844SjsdFt0&t=40s

     

    https://skdtac.com/esstac-556-kywi-kydex-wedge-insert/

    https://8492nylonworks.bigcartel.com/product/spiritus-esstac-5-56-pistol-kiwi-adapter-kit

     

    So yay, I’ve chosen a chest rig and have found the right retention for me... but I need to haul more stuff.

     

    First, there are many gut pouches you can buy for the spiritus (and aftermarket companies), and they can come in many different sizes. At moment I’m using one thats on the smaller side for my medical. I’m still experimenting on a good place to put my IFAK. I may do a blog addressing that at later date.

     

    Second is a pack. Again, I wanted something to work with my carrier and chest rig. I found the flatpack by HailyStrategic.

     

    https://www.youtube.com/watch?v=JOlu9mbCrxY&t=54s

     

    Note; they have change the design, it now opens in a clam-shell fasion (which is much better).

     

    Something I’d like to try later on is using packing cubes for easier organization and for “on the fly” load-outs.

     

    https://www.youtube.com/watch?v=xEUigYBhufg

     

    HailyStrategic also has some specific to their flatpack bag (and level 3A armor inserts);

     

    https://haleystrategic.com/shop/soft-goods

     

     

    This is not a bag for everything at “base camp” but more of a patrol pack. My Chest rig also fits into it well;

     

     

    image.thumb.jpeg.5e0628c44392de58a90abb0057384ffd.jpeg

     

    Hydration was another concern of mine. Heat index regularly gets past 100F in my area, so I wanted the ability to carry plenty of water. Looking at the dimensions online the source ILPS 3L bladder was too big. Found one on sale, and it fit!

     

     

    image.thumb.jpeg.40a45ec41c75df016da9edbaaef9bb4e.jpeg

     

    I haven't filled it to max capacity yet. I’m waiting on my rapid refill attachment. its a bit too snug to max fill and then get it past the hydration pocket zipper.

     

    Another hydration system I’ve use is the IcePlate. It only holds 1.5L and is rather bulky compared to a bladder, but the real appeal is body temperature control and the performance benefits therein. I have been out running around in the woods with friends and, to say the least, I can feel the benefits. Having had a heat injury before, I need to be a bit more aware or overheating myself. If you have the time, access to a freezer, and are wearing your carrier, I strongly recommend the IcePlate. You can also put hot water in it for cold weather (GrandThumb talks about this too).

     

    https://www.qoreperformance.com/collections/iceplate-featured/products/iceplate

     

     

    This is also something that you could throw in a vehicle without being too obvious, especially if you choose the grey color. along with some lighter wet and cold gear.

     

     

    If you want it on there more “permanently”, you can attach it by MOLLE and take all other straps off, and snap the chest rig on via the buckles.

    I want to be able to drop my plate carrier if I need to become more mobile. I overlay the rig on the carrier and use the shoulder pads as keepers. I’ll show a pic of one in and one out.

     

     

    image.thumb.jpeg.6f9c31becbcf41fc167f34c2ffc61722.jpeg

     

    I also have the option of taking the carrier side buckles off in favor of the ones on the pack.

     

    The brand names of these are costly, so I bought china clones off ebay just to try them out. As expected, the quality is lacking. I found my plate carrier also fits in the pack, when expanded, but the straps started to tear away from the bag (including the handle) and it was less than 30 lbs.

     

     

    image.thumb.jpeg.6b7e46f1e4a482f7fb66c65b15972b04.jpeg

     

    However; I am looking for someone local that could make it with a few simple tweaks. Another issue with the name brand is that they’re scarce, they generally sell out very quickly. If you have the coin, I would recommend buying the quality name brand.

    If you choose the ebay route, make sure that they have stock in the US. otherwise shipping may take much longer.

     

    I’m also leaving a reference pic I made for a group a while back, for the chest rig.

     

     

    CHEST RIG - Copy.jpg

  3. My goal is to guide people to make good decisions. However; I know that, for some, the learning curve is high and they still don’t know what they don’t know (and they shouldn’t be shamed for that).

     

    In this entry I will go a bit more in depth on plate carriers. I will be using examples of different carriers to point out different abilities and functions that they have.

     

    Lets start with the ease of ability to get in and out of a carrier, and the different ways to “shed” them.

     

    Shedding a carrier is mainly used to get out of it quickly in water (because all that extra weight help you sink) and in medical situations. Usually this is done with a pull string that allows it to come apart at once, or through quick disconnect devices at the shoulders and sides.

     

     

    A cummerbund style allows for better support when carrying more weight. It also has more “real estate” to place extra Things (such as magazines, radios, IFAKs – individual firt aid kit, side plates and more). They usually connect via velcro that in sandwiched under a flap, which makes them the most difficult to get in and out of. With all of the material that surrounds you, it doesn’t breath well which can lead to overheating in warmer climates, and (in my case) salt burns when worn for long periods of time.

     

    There are a few types of these and at least one other style of connection. There’s the traditional which consists of solid material and usually has MOLLE attachment, skeletonized (see CRYE Precision’s carrier) which has the MOLLE but has gaps in the material for improved breath-ability, and elastic (see Trex Arms AC1 carrier) with and without pockets, but I’ve never seen elastic with MOLLE (which you shouldn’t because the MOLLE wouldn’t allow it to stretch).

     

    The one other attachment method is MOLLE Tubes which slide/click into place. The receivers may weave into existing MOLLE or have velcro pieces that will sandwich under the flap, or just attach over existing velcro.

     

    Cummerbunds also have different fitment adjustment methods. Some use 2 or 3 straps with a sliding keeper of one sort or another, others use a lace similar to a boot, and some use a mix with velcro and elastic. All of them are kind of a pain to deal with BUT you shouldn’t be needing to adjust all that often, maybe a couple times a year when the seasons change and you are wearing more/less layers of clothing.

     

     

    Other minimalist carriers (that are usually lighter weigh) don’t use a cummerbund, instead they use a strap, which the width of may differ, and a buckle. Some (like AR500s Veritas) are capable of either method. I’ve seen a trend of some companies putting cobra buckles everywhere they can, don’t fall for this. Cobra buckles are great on belts, especially if repelling or using a drag strap, but unless you’re going to be using a lot of weight you probably don’t need one on “X” thing.

     

    When looking at plastic buckles make sure the company uses a good brand of buckles, Nexus is one of the good ones.

     

     

    Moving onto the shoulders, they usually adjust with velcro strap or buckles and some come with padding that velros around it.

    Velcro is lower profile. Buckles are usually closer to the back plate but may still get in the way when you run wires for communication, or hydration hoses. If you are a skinny guy the buckles may get in the way of putting the shoulder pad in the right place (because it pushes them forward). I’ve also seen carriers with only one buckle on the front of the shoulder to make it easier to get in and out of. Be sure to consider how this may effect shouldering your rifle.

     

     

    Some carriers are “slick” meaning there are no attachment areas on them (although they may still have velcro on the front and/or back), the purpose for these is usually concealment or to be low-profile.

    Another useful things that some companies will do is to add a vertical MOLLE strip on either side of the front (as seen on the Veritas, or with an included buckle on the AC1). This is usually coupled with velcro on the lower part so that the carrier is compatible with chest-rigs (like the Spiritus Micro Fight Chassis MK4).

    More on chest-rigs here;

     

     

    Let’s move on to the back of a carrier. Again, there may or may not be velcro here. There should be a drag handle. A drag handle is used to pull someone when they may not be able to walk, whatever the weight is of you + gear that’s what the handle needs to be able withstand. It needs to be easily accessible by a large hand with gloves on, and a large carabiner (so if they have a drag strap). It needs to have good stitching, I’ll go over stitching later, and preferably it needs to run down half or more of the carrier (that way it doesn’t rip off when used).

     

    Back panels seem to be a growing trend in the carrier manufacturer community. They allow you to have different load outs and capabilities while being able to swap out on the fly. The issue is it’s still relatively new, there are experimenting with different attachment methods and as such, there is not a popular one after market companies can go wild on. Just know they are there and if it interests you look into them, I know the HRT RAC is one of them.

     

     

    Along to the inside, the part that touches you; to cut down on material, some carriers just use cordura (or whatever their base material is). Others use a porous mesh to help it breath and dissipate sweat (be careful of those that use the fake version of this. It’s essentially a thin foam covered in a layer of a material that looks like the mesh). The are companies that are using a sort of baffle or space for airflow to get to, I think the HRT RAC is one and I recall Trex Arms playing around with another.

     

     

    Where the plates are held there is normally a velcro flap or a strap that snugs and holds your plates in place. There are some that have an attachment point and/or pocket closer to the center where your heart is. That was designed for LEOs (law enforcement officers) that usually wore soft armor, but wanted a little extra protection to cover their hear, just in case.

     

     

    Some may use zippers and the quality industry standard is KY brand zippers. When it comes to stitching I’m handing it off to a video because its something that’s better understood by seeing rather than me describing; https://www.youtube.com/watch?v=NDoYzwPlbk4

     

     

    Wanted to also mention that there are companies like Qore Performance that use another material that is laser cut. It is extremely lightweight, but I would point out that all rifle rated body armor fragments (some would say spall) and the carrier helps with containing this.

     

     

    I hope this clears up some questions so it can help you make a better buying decision when choosing a plate carrier.

     

     

     

    AR500 Veritas - https://www.ar500armor.com/veritas.html

     

    TrexArms AC1 - https://www.trex-arms.com/product-category/Body-Armor/

     

    HRT RAC - https://hrttacticalgear.com/product/hrt-rac-plate-carrier/

     

    Qore Performance - https://www.qoreperformance.com/collections/iceplate-exo/products/iceplate-exo?variant=32015408234611

     

    Crye Precision - https://www.cryeprecision.com/armor-equipment

     

     

    There are many more that are good, these are just the one’s I mentioned above.

     

     

    Be sure to take a look at my other blog as well; https://www.mymilitia.com/blogs/blog/45-wquons-refrences/

     

    Thank you for taking the time to read this.

     

  4. Matt In West Virginia
    Latest Entry

    Hello to All,

     

    I want to wish everyone a very happy and joyful Thanksgiving despite the war against American tradition to keep our traditions, thus memories, alive to be passed from one generation to the next.

     

    There is much amiss in America today, all bought and paid for by the Globalist Elite that wish to erase every boundary to every country in the world. The only way to achieve that goal is to take down America... and rest assured, there is an all-out political assault for the survival of the Deep State in America right now. They know it is ‘do or die’ as it pertains to their plan. It’s now or suffer setback for generations for the globalists attacking us FROM WITHIN.

     

    However, let us come together this Thanksgiving in honor of all that made our country even possible: The Beginning.

     

    Everything we hold near and dear as Patriots began right here, at our very 1st Thanksgiving. We need to put concerted effort into keeping this information (our history) alive in the minds and hearts of our children and family.

     

    In reading the top concerns of the patriots here, I feel led to express an opinion on the subject of, “When, where and how do we say ‘enough is enough’, taking the fight directly to the tyrants in American government? When will we as patriots rise up and say it is time for a ‘call to arms’?”


    I can’t say as I can foresee exactly when/if that time will come. What I do know is, none if us as individual community militias are big enough to make that call. It is clear that for such a thing as a call to arms to be effective, it will have to be done in unison and cohesion with every individual community militia in the US to be a monumental enough movement to gain any attention at all. It will take a platform from which to speak and be heard by all, a leader that we all will follow, money and all the support necessary to give such a thing a fighting chance.


    Recently patriots from across America gathered for a mega-rally in Washington. It has many names in the media, one of them being the ‘million man march’ on Washington. When you examine the various intel from that rally, or for me anyway, I realized that if a grassroots movement were to ever develop into a national agenda, it would be during such a time as this. Although there was no clear call to arms, there was a clear call to keep your ears to the radio and step up the ‘resistance’ we all display in opposition to the agendas we clearly see before us... a time to out and away our niceties in favor of physical resistance and counter-tactics that more or less fight fire with fire. 
     

    One cannot help but come away from that rally feeling a shift in strategic tide. I think that when/if a call to arms occurs, it will be during such a time, and through such an event as this.

     

    As students of history now in America, we realize that such a time as this is not completely foreign to us, as has been hopefully forever etched into our Constitution.

     

    There was a call to arms against the British when England sent troops against our rebellion of the King before America was even formed into the USA.

     

    There were TWO calls to arms during our CIVIL war: one call went out for Americans to come join the Republicans in the North to fight for freeing the slaves in defense of the Spirit of our Constitution. Another call went out for Americans to come join the southern Democrats to fight to keep the slave trade and the way of life Democrats had established in the South. 

     

    In all instances above, there was a call produced by people of enough influence to carry the weight necessary to sustain such ventures. Virtually all of them had to sacrifice their wealth and way of life to finance the war efforts. From there, individuals made up their own minds and answered the call of their conscience, traveling where they needed to go to be in the battle.

     

    I think it will be that way for us, ladies and gentlemen, if/when that time comes again. I think our call will come unexpectedly, from places unexpected, then each and every one of us will have to decide whether we will answer that call, who we’ll fight for and why... then it’ll be up to us to go and physically join the effort. The thing for us to do between now and then is prepare and train.

     

    This is the Reader's Digest version of my thoughts on the hows, whys and whens...

     

    But until then, let us put forth an effort to remember the difficulties in our beginning while knowing our current difficulties could not be anymore of a hardship. Let us remember the efforts it took to grow and work ourselves to success... the sacrifices made by all of those that came before us that eventually led to such a success that WE are blessed with the greatest nation on earth, the last beacon in the world to free men.

    Let us remember... and HONOR in as many ways as we can, the shoulders on which we stand today as we struggle to maintain our great country.

     

    Happy Thanksgiving, brothers and sisters... and may God continue to bless America.

  5. Megatron doomsday reports

    • 2
      entries
    • 149
      comments
    • 1000
      views

    Recent Entries

     

    This is the future folks

  6. Blackbird Brigade

    • 1
      entry
    • 0
      comments
    • 517
      views

    Recent Entries

    The American Revolution changed the world, but you might be surprised to learn this about the Revolution.

     

    View on Youtube.

     

    The Myth of the American Revolution - Fiver Minutes for Freedom.00_00_23_27.Still001.jpg

  7. Ideologicals corner

    • 1
      entry
    • 13
      comments
    • 512
      views

    Recent Entries

    The current events of our nation is something all patriots lement. The destruction of our Constitution that has been occurring long before my birth, The Balkanization of our nation and the people within, seeing Americans kill each other in the streets, as well as the voices of the average person being suppressed by those claiming to be systematically oppressed while the people of our union oppress each other, and themselves.

     

    Defending yourself under the law is cause to be demonized while rioting and threatening innocent bystanders is held as justice for the downtrodden. Lives lost defending freedom are dragged through the mud while domestic Terrorists killed or physically pushed back on are heralded as martyrs and freedom fighters. This is a gruesome and vindictive cycle that is actively tearing apart every thread of our society which was already on fire.

     

    The threats to our nation come from both within our borders and from lands outside of our home soil which would not be able to exist or act without our funding and support. Our political leadership is either in support of the mass assault of our society or at least are unwilling to act in direct opposition of it.

     

     The destruction we see in cities like Minneapolis and Seattle, Violence of the ilk of Portland Oregon, and the manipulation of people by both the media and the government is apparent. Bodies lay in our streets ranging from less than 10 years old up to past retirement age is a direct statement to the state of our union. 

     

    The abhorrent conflict that has turned us all against each other is well underway. As with our last supposed civil war this civil and societal rupture is and indeed has been developing in a way different than any conflict seen in recorded history.

     

    Our enemy is a conglomeration of ideas, beliefs, cults and violent mobs spanning the spectrum from useful yet ignorant masses fueled by unipolarized news, to semi-organized violent crowd based cult ideologies, to organized and hostile terror based militant groups such as John Brown Gun clubs, Marxist militias, redneck revolt, and militias that turned their backs on the American people and assist in training the aforementioned groups. This also encompasses politicians working in lock-step with these organizations whether out of fear, Pandering, or financial support. Even with the wide array of goals and ideologies these groups can rapidly and statically organize in the hundreds. They are well funded and supplied. During the Floyd Offensive, which was masked by coast to coast riots in the name of George Floyd; arms, Funding, equipment and goods that could be sold on the streets were looted which further helped with their funding and supply. 

     

    On our side we have patriotic Americans, Preppers, Individual militiamen. While more ideologically drawn together we are far from unified. Militias in some areas are asking for public donations, Too many people just want to be seen as leaders while not putting in the effort or toil that comes with that position. Personal arguments and flaring overactive egos destroy units whether established or just starting as well as amongst patriots gathering on forums and other digital spheres. This is not to insult our community, Only an urge to push towards unity and maturing our movement to be ready for the future difficulties we will face. 

     

    How can we hope to protect and preserve our communities or our constitution and liberty that countless patriots paid the utmost cost to honor and uphold. 

     

    I do not claim to know what we will see in the future. I have only my experiences and observations; as well as a deep love for my American brothers and sisters, our constitution which while in tatters still stands resolute, and pure stubbornness to not turn my back on what I hold dear and what we all rally behind. Until my dying breath this I will defend at all costs and hold the line of Freedom and Liberty.

     

    These colors don't run. This flag has NOT fallen or reversed. We assault forward unto Valhalla. No matter what we face, or what form this conflict takes, people across the world and both past and present will hear, heed, respect and join in with the battle cry of Freedom, Liberty, and America.

  8. The following is something that I post at many websites that I inhabit.  The time for this is getting short.  America is plunging headfirst towards civil war.  This war will make the Civil War look like a Sunday School picnic, by comparison (in the Civil War, think Sherman's march from the mountains to the sea ... and that was mild to what is coming).  The time is short, amigos:

     

    Once again, I will post the following link:  https://www.mymilitia.com/

     

    This website is a clearinghouse for militias throughout the United States.  For every member of the website, there are at least ten people in the militias who aren't members.  The militia I belong to is very well-organized, and although it's primarily defensive in nature, certainly has the organization and weaponry to go on the offensive, if necessary.  I'm convinced that it will be necessary.

     

    The only alternative to the inevitability of civil war is voting out the p u $ $ y Republicans ... you know who they are ... and electing real men and strong women, in their place.

     

    If you're not armed, get armed.  NOTE:  It's getting late ...

     

    If you're not equipped, do so.

     

    If you have no training, receive some (trainers are out there).

     

    An unarmed man or woman is nothing more than a target for violent death.  This is the new reality of the United States of America.  This country will not survive in its current form.  Fight, or live as a slave.  Simple choice ...

     

    And for God's Sake, JOIN A MILITIA

    • 1
      entry
    • 52
      comments
    • 684
      views

    Recent Entries

    Rev.E.
    Latest Entry

    We need to get active troops. We are running out of time to prepare for the possibility of a SHTF scenario. COMMS are extremely important to our success as a whole. It is even more critical that our Leadership be in control of all situations. Our current situation in the country is becoming violent. It is a great time to learn about our enemies. I can only suggest that we not listen to propaganda about what we as the Militia should be doing. We all have passion towards the protection and defense of our great country, but we can not dig our own graves because someone posted to the internet. MyMilitia was created to help keep us all on the same page. Let us not lose our way because of their agenda. 

     

    They want us to step up and take the first move of retaliation. We as a whole need to be more vigilant than their desire to attempt to destroy our country. The current times shall pass. This is not the first time and it is not the last. You want to step up and protect your communities, by all means do it, but check with your leaders first. Keep in mind, you are States Militias. Once you cross state lines with loaded weapons, you become felons. The only person who can have you cross state lines is our Commander and Chief President Donald Trump. Everyone needs to get active in the Area Code Militias. Please be safe and learn everything you can about the enemy at hand, Both ANTIFA but more importantly the Federal Government. God Be With Us! III%

     

    1st SGT 19th Tennessee Infantry, 1st Div. A Co.

  9. Do you ever wonder what could happen to you when you are legally separated from all family, all friends and placed into an "expert" institution where there is no freedom of speech or real choices? A place where you were FORCED to take the plan of action the "experts" give you? You might be tempted to think I'm talking about a psychiatric institution... but oh no. I'm talking about your local hospital, and you with a common illness.

     

    Because of the suppression of Constitutional rights and freedom of speech, medical personnel in New York City are FORCED to look for "messenger allies" on the opposite end of the country in order to sound alarms when things are happening that are NOT in the best interest of patients, which by the way, are completely isolated from the outside world.

     

    Best thing you can do is just listen. This isn't a conspiracy, folks. I myself have seen doctor/s place people in a private room, hook them up to a morphine drip, and watch as their body shut down because the "expert" determined it was time for them to die. I'VE SEEN IT.

     

    It was amazing how they changed their mind when I hooked up a camcorder and started to record the death. THEN the nurse got on the phone with the doc (right there in the room!), then they cut off the morphine and administered an antidote (without the doctor ever showing his face again), referred the patient to Charleston or Roanoke, and the patient lived another decade.

     

    What can happen when there's noone there to hook up a camcorder for you?

     

     

     

  10. The LORD is a warrior

    NOG-copy.010-e1451552460749.thumb.jpg.6d7a0693ac34943fe26d0a5246d6f578.jpg Hebrews 4:12  — "For the word of God is quick, and powerful, and sharper than any twoedged sword, piercing even to the dividing asunder of soul and spirit, and of the joints and marrow, and is a discerner of the thoughts and intents of the heart." 

    Have you ever wondered why some people treasure the Bible and others hate it with a ferocity that seemingly defies explanation? 

    Our weapon - The Word of God is described as a sword for good reason. 

    1. It is quick - God's Word doesn't adhere to political correctness & it doesn't cloak the truth in mystical ambiguity; instead the Word of God speaks directly to the heart of the matter & our heart being opened to encouragement, correction & absolute truth will determine our response. 

    2. - It is powerful. I can tell you from personal experience that Word of God has changed my life & continues to change it every day. There was a time when I was involved in a lifestyle that was leading me to an untimely death. When nothing else & no one could reach me or change me - God's Word did what I could not do. The Bible has changed countless lives for the better, has given hope to the hopeless & lifted the downtrodden in a way that no government or philosophy could ever achieve.

    The power of the Word of God is attested to even by it's enemies. Evidence of this is abundant by the number of people who protest against it.

    It amazes me, I don't ever recall a group of individuals who's hatred for the tooth fairy & unicorns has driven them to infringe on the rights of those who believe in them. 

    The very fact that the Word of God is such an offense to them is a testament to it's power. 

    3. It is sharper than a two edged sword. Have you ever held an authentic sword made by a master blacksmith? They are light weight & they are so razor sharp that in the right hands they can sever a limb from your body in an instant. 

    God's Word is sharper than a surgical instrument. I don't know who this saying is attributed to but it is said that you don't read the Bible, The Bible reads you. 

    The Bible speaks to your soul in a way that nothing else can.

    I have had times when God's Word has lifted me from the depths of dark depression & times when it has shook me to my very core. God speaks through His Word & our standing with Him isn't something we have to guess about - He will tell you through it. Are you struggling with something that you know keeps you separated from being at peace with the Lord? 

    Let His Word guide you. The Bible will open you up from the inside out. I've had surgery & it isn't fun. It takes time to recover. God's Word does that - it goes in us like a scalpel & it may be uncomfortable, maybe even painful for a time - but it will restore you to fullness in the end. 

    4. It discerns the thoughts & intents of your heart. Think about that for a moment. 

    You see, we can fool each other. People can be deceived by politicians, spouses, friends, etc. We like to think that we are experts & hiding the darkness & the lies that we tell ourselves and others. 

    The Word of God isn't fooled by any of that. God's Word knows the intent of yours & my heart better than we ourselves do. I can't count the number of times that I was sure I had found the justification for something I have either done or said only to have God show me through His Word the results of my actions before they manifested & even more - the true intentions behind it. 

    God's Word exposes the lies of the world & corrects the philosophy of men. To know the Word of God intimately is to know the truth & that's the only way to avoid being deceived in the first place. 

    The most important thing I can leave with you is this - 

    Jesus Christ ( Yeshua Hamaschiach ) & the Word of God are synonymous. 

    In John Chapter 1 this is laid out clearly. " In the beginning was the Word & the Word was with God & the Word was God.... & The Word became flesh & dwelt among us..." 

    This is what will make the Bible your weapon & your shield and fill you with truth or it will make the Bible a rock of offense but faced with Jesus Christ we are forced to make a decision. 

    Today, I would like to encourage you to do your weapons Maintenance. We don't know the outcome of the coming days, weeks or years. We can be told wonderful sounding lies that only give false hope & trust in man to finally get it right .... Or - we can fill our minds with Truth that is based on the eternal Word of Almighty God who cannot lie & allow Him to lead us to true victory. 

    Reading your Bible isn't a chore - it's an opportunity to walk closer with the One who fashioned you & knew you before you were ever born. 

     

     

  11. fixer
    Latest Entry

    By fixer,

    After a few failed attempts in collaboration with some popular "conservative" Facebook groups to extend our reach we would like to make an offer to build you your very own website in exchange for your collaboration.

     

    Basically if you have an established page with >50,000 followers we will build you a website if you allow us to post on your page a post that will include a meme image with a link to our website here on a some what regular but non-spammy basis

     

    contact me [email protected]

     

    collaboration.jpg

  12. 631 American
    Latest Entry

    Freedom Rings Joke.jpg

  13. My Militia Contests and Giveaways

    • 1
      entry
    • 2
      comments
    • 785
      views

    Recent Entries

  14. M1

    m1_garand_bayonet-1.jpg.331e7e9be15c8963088811a6473cb6e8.jpg

    In 1943, when the United States gave its soldiers the M3 combat knife, a project to renew the M1905/1942 bayonet was launched. A new model whose blade is shorter than its predecessors is developed and production begins immediately. The M1905/1942 bayonets are recalled at the factory and their blades are shortened. The new bayonets have the name M1 whereas the modified M1905 are called M1905E1.

    The M1 bayonet is compatible with the Garand and M-1903 Springfield rifles. It was manufactured from 1943 to 1945 by UFH (Union Fork and Hoe), PAL (PAL Blade Company), AFH (American Fork and Hoe), UC (Utica Cutlery) and OL (Oneida Limited).

    These bayonets were deployed for the first time during the Battle of Normandy in June 1944. They were also used on the Pacific front and opposed to the long Japanese bayonets-swords: many American soldiers chose to keep the old model M1905 in order to fight on equal terms.

    The M1 bayonet is also used after the Second World War during the Korean War. It was replaced in 1953 by the M5 model.

     

    M2

    m2_pocket_knife-1.jpg.8229e133ccaeacb2ddefb5fc84d399cb.jpg

    When the Americans develop the principle of airborne troops, new equipment is devised to respond to situations that paratroopers may face. With the problem of parachute hangers, which are regularly tangled with weapons, bags and sometimes parachutists themselves, they ask to be equipped with a small knife allowing them to cut these links, if necessary .

    Several knives were presented to parachutists in 1940, and one of them was unanimous: a small knife created by the Schrade Cutlery Company in Walden, New York, which the Americans quickly called “Knife, Pocket, M2″. It holds in a pocket of the M2 combat jacket which allows it to be easily accessible by its user. Unlike a conventional knife, it works with the locking system which saves time in an emergency. It also has a metal ring to hold a wrist strap.

    Several models are designed by various American companies and delivered to parachutists, such as the Presto M2 curved blade.

     

    M3

    m3_trench_knife-1.jpg.3051a943ea9298f90c36546d9590eba9.jpg

    In 1942, the Americans sought to replace the old Mk I Trench model dating from the First World War. Two combat knives are then competing in December: the M3 Trench Knife and the 1912C2 developed by the Marine Corps. The imperatives of design are the speed of production and the use of few raw materials which are becoming more and more expensive with war. It is also the lowest cost of production of the M3 that allows it to be selected in relation to its competitor.

    The M3 Trench Knife, also known as Fighting Knife, entered service in March 1943. Initially, the Americans wanted to distribute it to all non-bayonet soldiers (including those armed with the Thompson gun and the USM1 rifle) , But they primarily equip units likely to face hand-to-hand combat such as airborne troops and Rangers.

    The knives come with a M6 riveted leather sheath that can be attached to a belt or directly at the calf. Paratroopers are used to placing them along their boots so that they can be used quickly after the jump.

    In 1944, enough knives were available to equip the entire armed forces of the United States. In fact, no fewer than nine companies are responsible for their production (see the manufacturers’ list and the copies on the right). The production ends in August 1944 but its use is still authorized in the American armies.

     

    M4

    m4_bayonet-1.jpg.15c5302e1075eef30d39d3b2da3a48f6.jpg

    When the Americans defined the distribution of bayonets for their soldiers in 1942, it quickly became apparent that some of them were not equipped with bayonets. This is particularly true for personnel equipped with the Thompson gun and the USM1 rifle.

    Initially, the US Army gave its soldiers without bayonets the M3 combat knives that was delivered during the year 1943. But at the same time it was preparing the development of a bayonet specific to the rifle USM1. This one is available in May 1944, a month before the launch of Operation Overlord in Normandy.

    The guard is covered with leather, which differentiates it from the guards produced after the war and which are plastic (cf picture above). The M4 bayonet is equipped with a model M8A1 sheath that is identical to that used by the M3 combat knife.

    However, very few USM1 rifles are equipped with the adapter needed for the bayonet and few soldiers use this weapon in its original function.

     

    M5

    US-Military-M5-Bayonet1.jpg.d2261531d1e7c194cbfdf506ca79deba.jpg

    During the Korean War, the M1 bayonet and M1905 bayonet which mount to the M1, were proven difficult to remove with gloves on. As a result, the U.S. M5 Garand bayonet was designed and issued in 1953. This was a total redesign based on the M4 bayonet used by the M1 carbine. The M5 bayonet looks nothing like the original M1905 or M1 bayonets for the M1 Garand. The M5 is the only U.S. bayonet without a barrel mount ring on the crossguard, making it look more like a fighting knife than a bayonet.

     

    M6

    M6_Bayonet.jpg.fdca98e71a5410107e4e1bc5ee0da569.jpg

    The M6 Bayonet is a bayonet used by the U.S. military for the M14 rifle. It was introduced in 1957, at the same time as the rifle itself.[1] It is the only type of bayonet made for the M14, and the only other rifle it fits is the civilian version of the M14, the M1A. Like its predecessor, the M5 bayonet for the M1 Garand rifle, the M6 was intended to serve additional roles as a combat knife and utility knife. The basic blade design was like the M4, M5, and later M7 bayonets, based on the World War II designed M3 Trench Knife.[2] The overall length of the M6 is 11 3/8 inches, with a blade 6 5/8 inches long. Contractors who manufactured the M6 included Aerial Cutlery Co., Columbus Milpar and Mfg. Co. and Imperial Knife Co.

     

    M7

    707360957_M7_Bayonet__M8A1_Sheath_MOD.thumb.jpg.7502fe0e3afc0d369accf0aca8bd2f9f.jpg

    The M7 bayonet is a bayonet that was used by the U.S. military for the M16 rifle, it can also be used with the M4 carbine as well as many other assault rifles, carbines and combat shotguns. It can be used as a fighting knife and utility tool. It was introduced in 1964, when the M16 rifle entered service during the Vietnam War.

     

    The M7 bayonet very similar to the older M4 bayonet with the Korean War era plastic grips for the M1/M2 carbines except that the M7 has a much larger muzzle ring. The M7 has the same two-lever locking mechanism as the M4, that connects to a lug on the M16 rifles barrel. The M4 (M1/M2 carbine), M5 (M1 rifle), and M6 bayonet (M14 rifle), all derived from the World War II M3 fighting knife.

    The M7 differs from M6 bayonet for the M14 rifle. Most notably, the diameter of the muzzle rings, and the locking mechanism. The M7's release mechanism is on the pommel, while the M6 has a spring-loaded lever near the guard that when depressed releases the bayonet. Both models are approximately the same length, have the same black finish, and use the M8A1, or later M10 sheath.

    The M7 1095 carbon steel blade is 6 3/4 inches long, with an overall length of 11.9 inches. Blade width is 3/16 inch and it weighs about 9.6 ounces. One edge is sharpened its full length while to opposite side of the blade has approximately 3 inches sharpened. There are no markings on the blade itself. The manufacturer's initials or name along with "US M7" will be found stamped under the crossguard (see photo, right). The non-slip grips are molded black plastic. The steel parts have a uniform dark grey/black parkerized finish.

    The M7 bayonet NSN is NSN 1095-00-017-9701. The initial contractor was Bauer Ord Company. Colt (manufacturer of the M16) and Ontario Knife Company made many of the M7 bayonets for the military and continue to make and sell them commercially. Other manufacturers included Carl Eickhorn [for Colt], Columbus Milpar & Mfg. (MIL-PAR), Conetta Mfg., Frazier Mfg., General Cutlery (GEN CUT), and Imperial Knife. The M7 was also manufactured in Canada, West Germany, the Philippines, Singapore, Israel, South Korea and Australia.

     

    The M7 has been replaced by the M9 bayonet in Army service, and the Marine Corps replaced it with the OKC-3S bayonet. The Army, Navy, and USAF still use M7s and may do so for years to come.

    ARMY M9

    US-Military-M9-Bayonet-used-as-Wirecutter.thumb.jpg.872bd30d23fce5bc3913a1b05d2b9f98.jpg

    The M9 Bayonet, officially known as the M9 Phrobis III, is a multi-purpose knife and bayonet officially adopted in 1986 by the United States. It has a 7-inch (18 cm) blade and is issued with a sheath designed to double as a wire cutter.

     

    The M9 bayonet was designed and developed by Charles A. "Mickey" Finnat his R&D company, Qual-A-Tec. It is a refined copy of the Russian AKM Type I bayonet.He later produced it under the  Phrobis III name, filling a military contract for 325,000 units. Buck Knives was contracted to make 300,000 units and sold a commercial version under their own name. Finn's designs proved extremely popular, and were widely counterfeited and sold illegally by other makers. In 1986, Finn received U.S. Patent 4,622,707, however they continued to flow unchecked into the United States from Asia and Mexico, cutting into legitimate sales.

    After the Phrobis III bayonet contract was completed, rights to the M9 reverted to the United States Army and there were many subsequent versions from other companies. It is issued by the armed forces of the U.S. and other countries, and has also been sold commercially in various versions.

    Some production runs of the M9 have a fuller and some do not, depending upon which contractor manufactured that batch and what the military specs were at the time. The M9 Bayonet partially replaced the older M7 Bayonet, introduced in 1964. Although it has been claimed that the M9 may be more prone to breakage than the older M7, the M9 bayonet has a 20% thicker blade and tang (0.235" vs. 0.195") and a 75% greater cross-sectional area of steel in the blade than the M7.

     

    MARINES OKC-3S

    Bayonet_OKC-3S_-_Ontario_Knife_Company.thumb.jpg.794ba3267b0009bdf65070ad5514a88d.jpg

    The OKC-3S is a bayonet developed by the United States Marine Corps to replace the M7 bayonet and M9 bayonet as its service bayonet for the M16 family of rifles and M4 series carbine. This multipurpose bayonet provides greater durability than the M7 and also functions as a fighting knife.

     

    The OKC-3S is part of a series of weapon improvements begun in 2001 by Commandant of the Marine Corps James L. Jones to expand and toughen hand-to-hand combat training for Marines, including training in the Marine Corps Martial Arts Program and knife fighting. In the Multi-Purpose Bayonet program, 33 different knives were evaluated. The OKC-3S performed best, or next to best, in nearly all testing categories. A contract for OKC-3S was made in December 2002 and production and distribution began in January 2003

     

    The OKC-3S is manufactured solely by the Ontario Knife Companyand identical civilian versions are available for purchase. It bears a resemblance to the Marines' iconic Ka-Bar fighting knife, though it is not fullered. It is larger, thicker and heavier than the M7 although slightly thinner and lighter than the current U.S. Army-issued M9. A sharper point helps penetrate body armor that many modern adversaries wear; while serrations near the handle help improve its function as a utility knife. In one demonstration, a prototype was able to pierce a punching bag covered with aircraft aluminum and a ballistic vest. The entire weapon is designed to be corrosion resistant, and weighs 1.25 lb (0.57 kg) with its sheath. The scabbard and grip are colored to match the Corps' coyote tan gear, compatible with both woodland and desert camouflage. The NATO Stock Number is 1095-01-521-6087.

    The OKC-3S features an 8 in (20.32 cm) long, 1.375 in (3.49 cm) wide, 0.2 in (0.51 cm) thick blade. The serrations measure 1.75 in (4.4 cm) of the blade length on the true edge. The blade is made from high carbon steel rated at HRC 53-58 and is capable of functioning without breakage in operating temperatures of −25 to 135 °F (−32 to 57 °C). The blade also has a non-reflective phosphate finish.

    The grip is made of Dynaflex, a synthetic non-slip material, is ergonomically grooved, and is more oval than round. This design helps prevent repetitive-strain injuriesand hand fatigue during training. It also features an embossed Eagle, Globe, and Anchor molded in to allow a user to identify the direction of the blade in the dark. The full tang connects the cross guard/muzzle ring (which is .165 in (0.42 cm)) and pommel latch plate that clasps the barrel lug; both are phosphate coated like the blade. Former Ontario Knife Company president and chief executive Nick Trbovich Jr. said of it: "We spent a lot of time making sure the handle was ergonomically correct… There are no blister points on the handle."

    The polyester elastomer scabbard, designed by Natick Labs, offers a weight and noise reduction from the previous M7 Scabbard and is ILBE compatible. It has a fitted internal stainless steel spring and friction device at its throat to secure the bayonet. A ceramic-coated aluminum honing rod is located on the back of the scabbard. The scabbard is compatible with the MOLLE/PALS modular attachment system. The scabbard lacks the wire cutter of the M9 for use when assaulting beaches or other concertina wire–fortified obstacles.

     

    Do you own any of these knifes? Tell us about it and please Post photos below !!

    • 0
      entries
    • 0
      comments
    • 351
      views

    No blog entries yet

  15. Area Code Militias

    • 0
      entries
    • 0
      comments
    • 374
      views

    No blog entries yet

  16. Militia; Being United

    • 0
      entries
    • 0
      comments
    • 361
      views

    No blog entries yet

  17. The Lizard Farmer

    • 0
      entries
    • 0
      comments
    • 184
      views

    No blog entries yet

  18. range report

    • 0
      entries
    • 0
      comments
    • 117
      views

    No blog entries yet


×
×
  • Create New...

Important Information

Use of this site is confirmation and acceptance of your understanding of our Terms of Use , Privacy Policy and site Guidelines . We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.